
Collapsible content
Technologies
Technologies
The Ocura LED Mask uses four clinically studied wavelengths of light therapy, each targeting a different layer of skin and a different concern.
Red (630nm) stimulates collagen production at the surface, reducing fine lines and improving skin texture over time.
Blue (460nm) targets and eliminates acne-causing bacteria, calming active breakouts without harsh chemicals.
Yellow (590nm) soothes redness and sensitivity while improving overall skin tone and radiance.
Near Infrared (850nm) penetrates deepest into the dermis, stimulating elastin production and supporting long-term firmness and repair.
240 LEDs. Three intensity levels. 10 to 30 minute sessions. One mask that does it all.
Adjustable Levels
9 power levels allowing for precise calibration to address specific skin imperfections. By tailoring the intensity to each individual's needs, the pen can effectively target and treat a wide range of concerns
Safety Measures
Built-in safety measures to prevent excessive or inappropriate usage. This ensures that the treatment remains within safe parameters, reducing the risk of adverse effects and ensuring the user's well-being throughout the skincare journey.
Is this safe to use?
Is this safe to use?
es. The Ocura LED Mask uses non-thermal, non-UV light therapy. There is no heat, no radiation, and no risk of burning. It is safe for regular home use when used as directed.
We recommend starting at the lowest intensity setting if you are new to LED therapy. Always wear the included eye covers during treatment.
Do not use if you are pregnant, have a photosensitivity condition, or are taking medications that increase light sensitivity. Consult your doctor if you are unsure.
How to use
How to use
- Cleanse your face and neck thoroughly. No products underneath the mask.
- Select your light mode based on your skin concern. Adjust intensity to your comfort level.
- Put on the eye covers and slip the mask on. Press start and relax for 10 to 30 minutes.
- Remove the mask and apply your serums and moisturizer. Post-treatment skin absorbs skincare more effectively.
Use 3 to 5 times per week for best results. Consistent use over 4 to 6 weeks is where you will see the most visible change.
What's Included & Specifications
What's Included & Specifications
In the box:
- 1x LED Face Mask
- 2x Cheek Pads
- 1x Remote Controller
- 1x USB Charging Cable
- 2x Eye Covers
- 1x Satin Storage Bag
- 1x Instruction Manual
Specifications:
- Material: Flexible Silicone
- Number of LEDs: 240
- Wavelengths: 630nm / 460nm / 590nm / 850nm
- Intensity Levels: 3
- Session Time: 10 to 30 minutes
- Battery: 3000mAh lithium, built-in
- Charging: USB
- Color: White
How quickly can I expect results?
How quickly can I expect results?
Most users begin noticing a difference in skin radiance and texture within 3 to 4 weeks of consistent use, 3 to 5 sessions per week. Fine line reduction and firming effects develop gradually over 4 to 6 weeks.
LED therapy works at the cellular level. Results are real, but they are not instant. Taking before and after photos at the start of your routine is the best way to track your progress, since gradual changes can be easy to miss day to day.
What makes this mask different than others?
What makes this mask different than others?
Most LED masks on the market offer one or two wavelengths. The Ocura LED Mask gives you four clinically studied wavelengths in one flexible silicone mask, so you can target multiple skin concerns without buying separate devices.
240 LEDs sit directly against your skin for maximum light absorption. The flexible silicone conforms to your face, including the jaw and cheek areas most rigid masks miss entirely. And with three adjustable intensity levels and a remote controller, you have full control over every session from day one.
One mask. Four wavelengths. A complete at-home treatment.
Shipping & Returns
Shipping & Returns
Free Shipping
Free shipping on all orders over $30.00
Shipping Time
Most orders ship within 1 business day and arrive within 9-12 business days.
Returns 90-Day Satisfaction Guarantee. Try risk-free with our hassle-free return policy.
As Seen in
Results after 4 weeks
95%
said their skin looks more radiant and youthful after using this product.
90%
said it improved the firmness, texture, and appearance of fine lines and wrinkles.
100%
said they would recommend it to others
Based on an independent consumer perception study of 50 people after 4 weeks using our LED Skin Rejuvenation Mask. Results may vary.
4 Simple Steps
1. Cleanse & Prepare the Skin
Thoroughly cleanse your face and neck of oils, makeup, and residues. For enhanced results, apply a lightweight hydrating serum before putting on the mask. Hyaluronic acid and peptide serums work especially well. Avoid retinoids or strong acids underneath the mask as these can cause irritation.
2. Select Your Light Mode
Choose the wavelength that matches your skin concern. Red for fine lines and firmness. Blue for breakouts. Yellow for redness and tone. Near-infrared for deep repair. Adjust intensity to your comfort level, starting low if you're new to LED therapy.
3. Perform the Treatment
Slip the mask on and press start. Relax for 10 to 30 minutes while the light works at the cellular level. The built-in timer handles the rest. You can read, watch TV, or simply unwind.
4. Complete Your Routine
Remove the mask and apply your moisturizer or favorite serum. Post-treatment skin absorbs active ingredients more effectively, so this is the ideal moment to lock in hydration and let your skincare do its best work.
Proven to Reduce Visible Signs of Aging.
240 LEDs deliver four clinically studied wavelengths, penetrating deep into the skin to target aging, uneven tone, breakouts, and loss of firmness all in one session.
Frequently Asked Questions
What skin concerns is the Ocura LED Mask for?
What skin concerns is the Ocura LED Mask for?
The Ocura LED Mask targets fine lines and wrinkles, loss of firmness, uneven skin tone, dullness, redness, sensitivity, and active breakouts.
With four wavelengths working together, it addresses multiple concerns in a single session rather than forcing you to choose one.
Which light mode should I use for my skin concern?
Which light mode should I use for my skin concern?
Red (630nm) for fine lines, wrinkles, and firmness. Blue (460nm) for active breakouts and acne-prone skin. Yellow (590nm) for redness, sensitivity, and uneven tone. Near-infrared (850nm) for deep repair, elastin production, and overall skin density.
You can use one mode per session or combine them depending on your skin's needs.
Can I use multiple light modes in one session?
Can I use multiple light modes in one session?
Yes. You can run through multiple wavelengths back to back within a single session. Here is a simple starting point:
- Blue light (460nm): 5 minutes. Targets bacteria and calms active breakouts.
- Red light (630nm): 10 minutes. Stimulates collagen and reduces fine lines.
- Yellow light (590nm): 5 minutes. Soothes redness and evens skin tone.
- Near-infrared (850nm): 10 minutes. Deep repair, firmness, and elastin production.
That covers a full 30 minute session using all four modes. If your main concern is a specific issue, spend more time on the wavelength that targets it and reduce the others accordingly. Start with shorter sessions at lower intensity if you are new to LED therapy and build up as your skin adapts.
Is it safe to use at home?
Is it safe to use at home?
Yes. The mask uses non-thermal, non-UV light therapy. No heat, no radiation, no risk of burning. It is safe for regular home use when used as directed. Start at the lowest intensity if you are new to LED therapy. Do not use if you are pregnant, have a photosensitivity condition, or are taking medications that increase light sensitivity.
Does the light hurt my eyes?
Does the light hurt my eyes?
The mask emits bright light and we recommend always wearing the included eye covers during treatment. They are designed to block the light completely while staying comfortable throughout your session. Some users are more sensitive than others, so the eye covers are there to make sure every session is comfortable
How long before I see results?
How long before I see results?
Most users notice improved radiance and skin texture within 3 to 4 weeks of consistent use, 3 to 5 sessions per week. Fine line reduction and firming effects develop over 4 to 6 weeks. Taking before and after photos at the start is the best way to track your progress since gradual changes can be easy to miss day to day.
What if I don't see results?
What if I don't see results?
Results vary by skin type, concern, and consistency of use. Make sure you are using the mask 3 to 5 times per week and giving it a full 4 weeks before evaluating. If you are still not satisfied, our 90-day guarantee has you covered. Contact our team and we will make it right.
Why is the Ocura LED Mask better than other LED masks?
Why is the Ocura LED Mask better than other LED masks?
Most LED masks on the market offer one or two wavelengths. The Ocura LED Mask gives you four clinically studied wavelengths in one flexible silicone mask, so you can target multiple skin concerns without buying separate devices.
240 LEDs sit directly against your skin for maximum light absorption. The flexible silicone conforms to your face, including the jaw and cheek areas most rigid masks miss entirely. And with three adjustable intensity levels and a remote controller, you have full control over every session from day one.
One mask. Four wavelengths. A complete at-home treatment.
Upgrade Your Results







